Archive | July 14th, 2011

Learn to solder with eevblog’s David L. Jones!

Hello Readers

How is your soldering? Have you always wanted to improve your soldering skills, or never heated an iron in your life and didn’t know where to start? No matter your level of skill you could do a lot worse than review the following video blogs in this article by David L. Jones.

Who? 

[David] shares some of his 20 years experience in the electronics design industry in his unique non-scripted naturally overly enthusiastic and passionate style.
Bullsh!t and political correctness don’t get a look-in.

Dave started out in hobby electronics over 30 years ago and since then has worked in such diverse areas as design engineering, production engineering, test engineering, electro-mechanical engineering, that wacky ISO quality stuff, field service, concept design, underwater acoustics, ceramic sensors, military sonar systems, red tape, endless paperwork trails, environmental testing, embedded firmware and software application design, PCB design (he’s CID certified), power distribution systems, ultra low noise and low power design, high speed digital design, telemetry systems, and too much other stuff he usually doesn’t talk about.

He has been published in various magazines including: Electronic Today International, Electronics Australia, Silicon Chip, Elektor, Everyday Practical Electronics (EPE), Make, and ReNew.

Few people know Dave is also a world renowned expert and author on Internet Dating, a qualified fitness instructor, geocacher, canyoner, and environmentalist.

Regular readers of this website would know that I rarely publish outside material – however the depth and quality of the tutorials make them a must-see for beginners and experienced people alike. Furthermore, if you have the bandwidth they can be viewed in 1080p. And as a fellow Australian I’m proud to support Dave and his efforts. So I hope you can view, enjoy and possibly learn from the following videos:

The first covers the variety of tools you would use:

And the second covers through-hole PCB soldering:

The third covers surface-mount soldering:

Finally, watch the procedure for soldering a tiny SMD IC using the ‘dead bug’ method:

And for something completely different:

If you enjoyed those videos then don’t forget to check out what’s new on Dave’s eevblog website and forum. Videos shown are (C) David L. Jones 2011 and embedded with permission.

As always, thank you for reading and I look forward to your comments and so on. Furthermore, don’t be shy in pointing out errors or places that could use improvement. Please subscribe using one of the methods at the top-right of this web page to receive updates on new posts, follow on twitterfacebook, or join our Google Group.

Posted in education, eevblog, hardware hacking, learning electronics, soldering2 Comments


Subscribe via email

Receive notifications of new posts by email.

Arduino Tutorials

Click for Detailed Chapter Index

Chapters 0 1 2 3 4
Chapters 5 6 6a 7 8
Chapters 9 10 11 12 13
Ch. 14 - XBee
Ch. 15 - RFID - RDM-630
Ch. 15a - RFID - ID-20
Ch. 16 - Ethernet
Ch. 17 - GPS - EM406A
Ch. 18 - RGB matrix - awaiting update
Ch. 19 - GPS - MediaTek 3329
Ch. 20 - I2C bus part I
Ch. 21 - I2C bus part II
Ch. 22 - AREF pin
Ch. 23 - Touch screen
Ch. 24 - Monochrome LCD
Ch. 25 - Analog buttons
Ch. 26 - GSM - SM5100 Uno
Ch. 27 - GSM - SM5100 Mega
Ch. 28 - Colour LCD
Ch. 29 - TFT LCD - coming soon...
Ch. 30 - Arduino + twitter
Ch. 31 - Inbuilt EEPROM
Ch. 32 - Infra-red control
Ch. 33 - Control AC via SMS
Ch. 34 - SPI bus part I
Ch. 35 - Video-out
Ch. 36 - SPI bus part II
Ch. 37 - Timing with millis()
Ch. 38 - Thermal Printer
Ch. 39 - NXP SAA1064
Ch. 40 - Push wheel switches
Ch. 40a - Wheel switches II
Ch. 41 - More digital I/O
Ch. 42 - Numeric keypads
Ch. 43 - Port Manipulation - Uno
Ch. 44 - ATtiny+Arduino
Ch. 45 - Ultrasonic Sensor
Ch. 46 - Analog + buttons II
Ch. 47 - Internet-controlled relays
Ch. 48 - MSGEQ7 Spectrum Analyzer
First look - Arduino Due
Ch. 49 - KTM-S1201 LCD modules
Ch. 50 - ILI9325 colour TFT LCD modules
Ch. 51 - MC14489 LED display driver IC
Ch. 52 - NXP PCF8591 ADC/DAC IC
Ch. 53 - TI ADS1110 16-bit ADC IC
Ch. 54 - NXP PCF8563 RTC
Ch. 55 - GSM - SIM900
Ch. 56 - MAX7219 LED driver IC
Ch. 57 - TI TLC5940 LED driver IC
Ch. 58 - Serial PCF8574 LCD Backpacks
Ch. 59 - L298 Motor Control
Ch. 60 - DS1307 and DS3231 RTC part I
Arduino Yún tutorials
pcDuino tutorials

The Arduino Book

Arduino Workshop

Für unsere deutschen Freunde

Dla naszych polskich przyjaciół ...

Australian Electronics!

Buy and support Silicon Chip - Australia's only Electronics Magazine.

Use of our content…

%d bloggers like this: