How is your soldering? Have you always wanted to improve your soldering skills, or never heated an iron in your life and didn’t know where to start? No matter your level of skill you could do a lot worse than review the following video blogs in this article by David L. Jones.
[David] shares some of his 20 years experience in the electronics design industry in his unique non-scripted naturally overly enthusiastic and passionate style.
Bullsh!t and political correctness don’t get a look-in.
Dave started out in hobby electronics over 30 years ago and since then has worked in such diverse areas as design engineering, production engineering, test engineering, electro-mechanical engineering, that wacky ISO quality stuff, field service, concept design, underwater acoustics, ceramic sensors, military sonar systems, red tape, endless paperwork trails, environmental testing, embedded firmware and software application design, PCB design (he’s CID certified), power distribution systems, ultra low noise and low power design, high speed digital design, telemetry systems, and too much other stuff he usually doesn’t talk about.
He has been published in various magazines including: Electronic Today International, Electronics Australia, Silicon Chip, Elektor, Everyday Practical Electronics (EPE), Make, and ReNew.
Few people know Dave is also a world renowned expert and author on Internet Dating, a qualified fitness instructor, geocacher, canyoner, and environmentalist.
Regular readers of this website would know that I rarely publish outside material – however the depth and quality of the tutorials make them a must-see for beginners and experienced people alike. Furthermore, if you have the bandwidth they can be viewed in 1080p. And as a fellow Australian I’m proud to support Dave and his efforts. So I hope you can view, enjoy and possibly learn from the following videos:
The first covers the variety of tools you would use:
And the second covers through-hole PCB soldering:
The third covers surface-mount soldering:
Finally, watch the procedure for soldering a tiny SMD IC using the ‘dead bug’ method:
And for something completely different:
As always, thank you for reading and I look forward to your comments and so on. Furthermore, don’t be shy in pointing out errors or places that could use improvement. Please subscribe using one of the methods at the top-right of this web page to receive updates on new posts, follow on twitter, facebook, or join our Google Group.
Latest posts by John Boxall (see all)
- Review – Nextion TFT Human Machine Interface - May 23, 2015
- Editorial – Arduino versus Arduino - April 23, 2015
- Kit Review – JYE Tech DSO138 Digital Storage Oscilloscope - April 2, 2015