Tag Archive | "calculator"

Kit Review – Sinclair Cambridge Calculator

Introduction

It’s no secret that I enjoy kit reviews – it’s always interesting to see how well a kit goes together, along with the quality of parts, documentation and so on. But what about kits from the past? And not 2003. Recently a very rare opportunity to purchase a sealed Sinclair Radionics Cambridge calculator kit appeared on ebay – so it was ordered rapidly and duly delivered to the office. And thus the subject of this review.

You may be familiar with the Sinclair name – Sir Clive Sinclair introduced many innovative and interesting products to the UK and world markets in his own style. Some were a raging success, such as the ZX-series home computers – and some were not. However in 1973 Sinclair introduced a range of calculators, starting with the “Cambridge”. It’s a simple four-function calculator with an LED numeric display and a somewhat dodgy reputation.

The design evolved rapidly and at the Mark III stage it was sold assembled and as a kit. At the time handheld calculators were quite expensive, so the opportunity to save money and get one in kit form would have been quite appealing to the enthusiast – in January 1974 the kit retailed in the UK for 24.95 (+ VAT):

Sinclair Cambridge Calculator Kit advertisement

Assembly

Putting the Cambridge together required a balance of healthy paranoia, patience and woodworker mentality (measure twice – cut once). There wouldn’t be any second chances, or quick runs down to Altronics for a replacement part (well … there was one) so care needed to be taken. If you’re curious about the details, I’ve uploaded 82 full-resolution images from the build, including both instruction manuals and schematic onto flickr. Now to get started.

 The kit arrives in a neat, retail-orientated package:

Sinclair Cambridge Calculator Kit box

… with the components on one side of the foam:

Sinclair Cambridge Calculator Kit contents

… and the other side held he assembly guide (underneath which was a very short length of solder and the carrying case):

Sinclair Cambridge Calculator Kit guide

At this point I was starting to have doubts, and thought it would be better off in storage. But what fun would that be? So out with the knife and the shrink-wrap was gone, revealing the smell of 1974 electronics. Next to whip out the instructions and get started:

Sinclair Cambridge Calculator Kit instructions

They are incredibly detailed, and allow for two variations of enclosure and also offer tips on good construction – as well as the schematic, BOM and so on. Like any kit it’s wise to take stock of the components, which gave us the PCB:

Sinclair Cambridge calculator PCB

Sinclair Cambridge calculator PCB bottom

… the passives, diodes and transistor – and some solder wick:

Sinclair Cambridge Calculator Kit

At this point it turned out the all but one of the resistors were anywhere near the specified values in the instructions, and I wasn’t going to trust those electrolytic capacitors after 39 years. The replacement parts were in stock – including the original 1n914 diode that was missing from the kit. Thanks Clive. There was also a coil of unknown value:

Sinclair Cambridge Calculator Kit coil

… and the ICs, which included the brains of the operation – a General Instrument Microelectronics CZL-550:

CZL-550

… and an ITT 7105N:

ITT 7105N

… a bag of battery clips, buttons and adhesive-backed foam (which deteriorated nicely):

Sinclair Cambridge buttons battery cliips

At this point it was time to fire up the Hakko and start soldering, not before giving the PCB a good hit with the Servisol cleaner spray. I was worried about the tracks lifting while soldering due to heat and old-age, however the PCB held up quite well. The first step is to solder in the clips that hold (just) four AAA cells:

Sinclair Cambridge battery clips

… then the resistors and diodes:

Sinclair Cambridge calculator resistors

… followed by the transistor, ITT IC, ceramic capacitor and coil:

Sinclair Cambridge calculator assembly

Uh-oh – that ceramic went in the wrong hole. One leg was soldered where the coil was to sit. Without wanting to damage the PCB, de-soldering it was a slow, slow process. Then of course I didn’t have a ) 3.3nF in stock, so a quick spin to Altronics solved that problem (I bought 50) – one of which finally went in:

Sinclair Cambridge assembly

The transistor was also a bit of a puzzle, I hadn’t seen that enclosure type and the manual wasn’t much help, so the semiconductor analyser tester solved that problem:

transistor analysis

The next step was to fit the display, which is wedged in the large gap at the top of the PCB. The tracks on the PCB are supposed to meet the display, however time had affected the tracks on the display module, so I soldered small wire links across the gaps:

Sinclair Cambridge Display installation

Following the display were the two (new) electrolytics:

Sinclair Cambridge electrolytic capacitors

And now to the main IC. There wasn’t any second chances with this, and after some very gently pin-bending it dropped in nicely:

Sinclair Cambridge CZL550

After a short break it was time to assemble the keypad, which went smoothly. After cleaning all the foam dust off the buttons, they dropped in to their frame which in turn dropped into the enclosure, followed by the keypad layers:

Sinclair Cambridge keypad installation

You can also see in the display window and shroud have been fitted. From here the PCB is inserted:

Sinclair Cambridge assembly

… and a sticker from years gone by, as well as the metal clip over the bottom of the power switch. At this point a quick test with four AAA cells showed signs of life on the display, so the rear enclosure could be fitted:

Sinclair Cambridge Calculator

Now for the battery and final cover, and it’s ready to go!

Sinclair Cambridge Calculator

The digits are quite sharp, but very small – and set back from the window. This makes photography quite difficult. At the time if your calculator didn’t work, you could send it off to Sinclair and they’d repair or possibly replace it for you:

Sinclair Cambridge return form

Using the Cambridge

Well it works, so you have a calculator which is genuinely useful. However the Cambridge has a few quirks, which are attributed to the basic functions of the main IC. For example, when entering numbers the screen is filled with leading zeros until you select a function, however by using the manual you can complete complex work including square roots, percentages, loan repayments and much more.

Furthermore the Cambridge is quite the silent achiever, you can work with numbers as small as 1x10E-20 and up to 9.9999999E79. You simply enter the numbers in decimal form (e.g. 0.000000000123) … even though the display won’t show all the digits, they’re being stored in a register. To then extract the result, you continually multiply or divide by ten (making note of how many times you do that) until the digits appear on the screen. It sounds nuts today – but in 1974 it would have been a cheap way of avoiding a more expensive calculator. In the following video you can see th Cambridge in action, plus the results of dividing by zero:

More about Sinclair

The following video is a BBC dramatisation of the rise of the home computer in the UK market, and the competition between Sir Clive Sinclair (Sinclair) and Adam Curry (Acorn Computers) – which is quite entertaining:

You can find out more about the history of Sir Clive Sinclair here, and the calculator range here. If anyone can connect us with a Science of Cambridge MK14 computer, contact us.

Conclusion

From a 1974 perspective, that would have been a great kit to make, with some love and care it would have been successful. By today’s standards it was quite average – however you can’t really judge it from a 2013 perspective. Nevertheless, kudos to Sir Clive Sinclair for his efforts in knocking out a useful product as a kit. If you’re a collector, and see a sealed unit on ebay or elsewhere, give it a whirl. Just take your time, “think before doing”, and replace as many of the components as possible. I’ve put all the images in full resolution up on flickr, so you can follow along in more detail.

And while you’re here – are you interested in Arduino? Check out my new book “Arduino Workshop” from No Starch Press.

In the meanwhile have fun and keep checking into tronixstuff.com. Why not follow things on twitterGoogle+, subscribe  for email updates or RSS using the links on the right-hand column? And join our friendly Google Group – dedicated to the projects and related items on this website. Sign up – it’s free, helpful to each other –  and we can all learn something.

 

Posted in calculator, kit review, radionics, sinclair, tronixstuff, tutorial, vintageComments (9)

Hewlett-Packard 5082-7415 LED Display from 1976

In this article we examine a five digit, seven-segment LED display from Hewlett-Packard, the 5082-7415:

According to the data sheet (HP 5082-series.pdf) and other research this was available for a period of time around 1976 and used with other 5082-series modules in other HP products. Such as the Hewlett-Packard 3x series of calculators, for example:

Using the display is very easy – kudos to the engineers at HP for making a simple design that could be reusable in many applications. The 5082-7415 is a common-cathode unit and wiring is very simple – there are the usual eight anodes for segments a~f and the decimal point, and the five cathodes.

As this module isn’t too easily replaceable, I was very conservative with the power supply – feeding just under 1.6V at 10mA to each of the anode pins. A quick test proved very promising:

Excellent – it worked! But now to get it displaying some sort of interesting way. Using the following hardware…

  • Freetronics Eleven Arduino-compatible board
  • Two 74HC595 shift registers
  • Eight 560 ohm resistors
  • Five 1k ohm resistors
  • Five BC548 transistors
  • A large solderless breadboard and plenty of wires

… it was connected in the same method as a four-digit display (except for the extra digit) as described in my tutorial. Don’t forget to use the data sheet (HP 5082-series.pdf). You don’t have to use Arduino – any microcontroller with the appropriate I/O can take care of this.

Here is a simple Arduino sketch that scrolls through the digits with and then without the decimal point:

And the results:

Now for something more useful. Here is a function that sends a single digit to a position on the display with the option of turning the decimal point on or off:

So if you wanted to display the number three in the fourth digit, with the decimal point – use

with the following result:

We make use of the displayDigit() function in our next sketch. We introduce a new function:

It accepts a long integer between zero and 99999 (number) and displays it on the module for cycles times:

For demonstration purposes the sketch displays random numbers, as shown in the video below:

Update – 01/10/2014

You can purchase the four-digit version (QDSP6064) from Tronixlabs:

They worked very nicely and can be driven in the same method as the 5082-7415s descibed earlier. In the following video we have run the same sketches with the new displays:

In the meanwhile, I hope you found this article of interest. Thanks to the Vintage Technology Association website and the Museum of HP Calculators for background information. And if you enjoyed this article, or want to introduce someone else to the interesting world of Arduino – check out my book (now in a fourth printing!) “Arduino Workshop”.

visit tronixlabs.com

Have fun and keep checking into tronixstuff.com. Why not follow things on twitterGoogle+, subscribe  for email updates or RSS using the links on the right-hand column, or join our forum – dedicated to the projects and related items on this website.

Posted in 5082-7415, arduino, hardware hacking, HP, LED, lesson, part review, tronixlabs, tutorial, vintage

My calculator was afraid of the dark

For me calculators are like pens… many have passed through my hands, but my home is like an airport to them – they arrive, spend some time, then vanish during the middle of the night to destinations unknown. Especially that beautiful Hewlett-Packard 48G… come back! Yesterday after rummaging around for some graph paper my old accounting calculator appeared, blinking his/her display as it was exposed to the light for the first time in who knows how long.

1

It was alive! Finally something useful has returned home to the world of the useful. Well sort of… in the dark it shut down. *sigh* But in the spirit of repairing instead of replacing, this wouldn’t beat me. Armed with some miniature screwdrivers and a small box to hold all those screws in, I leapt in and started removing every screw in sight.

First I removed the rubber feet, as they are well-known hiding spots for crucial screws and rivets… but nothing there.

2

At this stage the screws looked like heading for the departure gates, so they went into the screw zoo…

3

Finally the cover came off, revealing some nice PCB work. Curiosity got the better of me and I kept unscrewing..

4

But at this stage, perhaps my enthusiasm had taken me too far… this looks easy to break and difficult to put back correctly!

5

Whoops… looks like things have gone a little out of hand. If this doesn’t go back together properly, the whole exercise and calculator has been a waste.

But there is something that intrigues me, two diodes, and something that looks like a cell or capacitor.

6

7

I was hoping it would be a capacitor that was charged by the solar cell, that would give me an excuse to use the SMD 0.2 Farad capacitors that I ordered by accident from element14 last month. (Never order components at three in the morning)

But no, it looked like a typical button cell. Time to give it a health check:

8

(Yes, I know. Cheap multimeter) So the cell measures 0.66 volts DC. But what should it be? Only one way to find out…

9

Sigh. So much trouble caused by such a small thing. (Note to Casio: I know you want to sell more calculators to lazy people who cannot disassemble them to replace the battery – but really, you couldn’t have done a better job in hiding this one). The cell is a GR927, and not listed in the Panasonic Australia or US web site. Argh. It is probably an OEM product, as it isn’t listed in element14 or RS. So back to Google. Aha! It’s a “399 silver oxide battery” – 1.55V @ 60 mAh. Off to the centre of retail madness…

Ok, I’m back! That was quick. 🙂

And the saga is over. The calculator can now return to my desktop, adding up those material costs and how much money that isn’t around. I keep the cell in my dead battery box, one day we will have a disposal centre for them…

final

So there you have it people – don’t throw something out for a simple fault. Spend a few moments to investigate and repair. You might have lost half an hour, but you saved money, a tiny portion of the environment, and gained the satisfaction of doing it yourself.

In the meanwhile have fun and keep checking into tronixstuff.com. Why not follow things on twitterGoogle+, subscribe  for email updates or RSS using the links on the right-hand column? And join our friendly Google Group – dedicated to the projects and related items on this website. Sign up – it’s free, helpful to each other –  and we can all learn something.

Posted in repairComments (1)


Subscribe via email

Receive notifications of new posts by email.

The Arduino Book

Arduino Workshop

Für unsere deutschen Freunde

Dla naszych polskich przyjaciół ...

Australian Electronics!

Buy and support Silicon Chip - Australia's only Electronics Magazine.

Use of our content…

%d bloggers like this: